Xerox 8830 Copier "drum light" Questions

...drum light blinking; I think drum is ok because I put drum from another working printer and the drum light continued to blink. The drum light is on due to a preset counter to notify you that the drum ...

drum light was blinking. Put in new drum but drum light was still blinking, copied 50 copies and drum light went full on which stopped all coping. Put in old drum and drum light was full on and copier

...Drum is exposed to light, the surface becomes: If a drum is exposed to light for a prolonged period of time it can be desensitized and cease working. In most copiers the drum is charged with either a ...

drum light is still blinking but the Attention light is not on, you must replace the imaging drum before the printer can continue printing. The imaging-drum light might be blinking by itself or at the

...drum light is blinking, and then printer stops printing. An error 40204 is written to the event log. The printer cannot detect the imaging drum correctly. Action Reinsert or replace the imaging drum. ...

Error light and Drum light are blinking. Do I Error light and Drum light are blinking. Do I need a new drum? Blinking says to replace drum soon, when it's on solid, it's time for a new drum...

drum light was blinking so have decided to replace with new drum, have put in an original new one as HP not one of these enviro things and the drum light still kepps flashing. I have replaced the drum

drum light is lit . Any suggestions? This machine has a separate drum and toner cartridge. Replacing the toner does not reset the drum light. Double check that the light on is, in fact, the drum light

Drum light HL-2040 Brother Drum light is on, I changed the Drum and it is STILL on, any ideas? Open the front cover. Locate the control panel button under the LED lights on the left side. Press the ...

...drum light comes on and it doesn't try to pick up paper and just shuts down. Sounds like it's time for a new drum but, here's the reset procedure that should make the drum light go off and allow ...