D-Link ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B) "makes powerful" Questions

disconnected power cable and now the router will not power up. Make sure that the power cable is securely plugged to the router. Try another power cable to isolate the issue. Directly connect the ...

i have d-link DIR600 router. When i am using my ethrnet cable to my pc it is working fine but when i am trying to use it with DIR 600 router it is not even detect internet connection Most likely the ...

Netgear DG834G v4 NO LEDs My Netgear Router has ceased to function. The power supply is connected but none of the LEDs are lit. I just wanted to check if there was anything I could do before I sent it

How can i turn 3com wireless router off?? no power button...!!!! in the manual they say there is a power button in the rear panel. but i see only an OK LED... You have two options to make. 1. Just ...

ROUTER PLUGGED BUT CAN NOT POWER ON Belkin N1 Wireless Router There are two possible reasons. 1. Defective power adapter 2. Defective router. Try to plug it to a different power outlet. If it still ...

When I plug it into my comcast router, I lose internet Make sure you are powering off both then power on the router then the Comcast modem when it is connected to the Internet port. Make sure your ...

This zhone 6212-13-200 modem continually connects, disconnects This zhone 6212-13-200 modem continually connects, then disconnects the internet. I may have the wrong power cord. you will need to use ...

Router will not turn on at all - power lead checked and OK. Before total loss of power router would come on briefly then turn itself off Make sure that you are using the power adapter that came with ...

simple power outage and I get no signal or internet connection.No lights on router. First, the obvious: If the router is directly plugged into a wall jack, make sure the breaker for that outlet isn't ...

I have no power showing, I tested the plug and It's appears to be good. Hello, First try different power slots on the wall and make sure the power cable is fine..once u make sure the power cable is ...