...port on the amp. The remote wire turns your amp on when turning ignition on and turns amp off when turning ignition off. This wire needs to be connected as without it, you will drain your
...amp. u can turn it on and off at will and it will bypass any problems that your current one may have. just mount the switch in you dash somewhere or in a console if you have one amp green power light ...
...turn on My amp gets to hot to touch. Now it won't turn on. When you first turn on the receiver the led lights red then turns off. All connections are good and intact. When I disconnect the speakers ...
...amp should turn on when you turn your radio on, not your truck. First try disconnecting the remote turn on that comes from your radio. After that is removed turn your radio on and them run a jumper ...
Question about Orion Car Audio & Video
...problem could be in the turn-on output from your head unit. You can resolve this by using a relay, or by using the ACC output from the ignition (red wire at radio wiring harness) to turn on the
Question about Car Audio & Video
...amp turn on ). Any of these wires send a 12 volt signal to whatever you hook them up to. run a wire from any of these wires that were just mentioned to the remote terminal on the amp, whenever you ...
Question about Bazooka Car Audio & Video
...amp don't turn on The amp needs a remote signal to turn on. This is provided by wire from the back of your head unit. Also look for a 'REM' or 'remote' connection on the amp (besides the 12v and ...
Question about American Pro Car Audio & Video
...amp turn on wire from the amp. then get a small wire then strip back both ends with a wire stripper only exposing enough for the copper wire to show. then touch one end to the 12volt on the amp and ...
amp turn on wire. You should have constant 12volt + to the battery terminal 12volt- to the ground and 12volt + from the head unit (radio) to the amp The turn on wire on most car stereos is a thin blue
...amp turn off when you remove the remote wire? If it does, then wire a toggle switch into the remote wire and just use it to turn the amp on and off. If the amp does not turn off with the remote wire ...
4 questions posted
Usually answered in minutes!
11 Questions
9 Questions
3 Questions
2 Questions