...red led to light up with no input to ch 2 just a 1kc tone on ch 1. are there any schematics in pdf form that i can download anywhere?....please help...thank you...ted kay check preamps small parts! ...
red light went off and only the amber light stayed on, no red current light on it looks like i might be a power supply problem ? can you please help thanks as iv had this amp for some time and don't ...
...light stays red power on light is green 1. Check that the trimpots on the front panel are all the way up. 2. The speaker relay on the Amp PCB may be bad. Over time the fingers can warp and won't make ...
Question about Behringer Audio Players & Recorders
red light on permanently one 1 channel, that channel just buzzes on beringer europower ep2500 if both clips lights is on chane d9 d10 d11 d12 and the two 220uf caps for the +15 and -15 voltage supply ...
Question about Creek Audio Players & Recorders
light from green change to red, the amp was not too hot, what is the problem? thanks Maybe you have hooked up the wrong impedance matching speakers and output got fried, let me know further to improve
...red standby light which never goes green. Anyone had this before? Both units have a problem with the output section. In case 1, the outputs are likely to be shorted. In case 2, the outputs are open. ...
...red light comes on flashing an no sound . I have to turn ampoff then back on . this will reset it but I still can't turn it over 1/2 volumne. Thanks Gerald It's going into "safe" mode. Basically ...
...red power light. I have checked all fuses & non are blown? can anyone help please In bridge mode, the left and right amplifiers are in essence connected together. Typically, the speaker ...
...light red is on channel 2 work but the 1 don,t work As always with stereo amps the two channels are identical, so if one goes wrong you have the other as a control for testing purposes. So if you ...
Question about Creek Audio Players & Recorders
...light turn to red, it cannot be turn off, unless otherwise you turn off the power, if you turn off the power and turn on again it can work again, but about 5~10 minutes it stop again, what is the ...
163 questions posted
Usually answered in minutes!
75 Questions
19 Questions
14 Questions
12 Questions