Question about Western Digital Caviar Computers & Internet
...jumper, then I tried to connect the harddisk to other computers, the same problem I had, but on of these computers recognize my harddisk with 0.0GB, and when I went to my computer icon to check ...
...harddisk showng 0.0GB in bios and PATA mode , how i can resolve it plz help I would try to reseat the disk. Also, try clearing CMOS by removing the battery or repositioning the CMOS jumper. If that ...
Question about Western Digital Caviar Computers & Internet
...jumper, then I tried to connect the harddisk to other computers, the same problem I had, but on of these computers recognize my harddisk with 0.0GB, and when I went to my computer icon to check ...
...extra harddisk u need to make the first hard disk as master and second one as slave.. reset he jumper as shown in the face of harddisk connect it with the cables and power supply manage bios ...
...jumper on it. Then read on harddisk you can find there is specifiaction for master, slave and cable select jumper settings. Put jumper as cable select then check. Also reconnect sata or ide and power ...
Question about Maxtor Computers & Internet
Harddisk fail!" BIOS recognize that as Maxtor . Is it lost? exist any software to diagnose him and repair it too? Is this a primary HDD? have you checked the jumper? You can also try to reseat the HDD
harddisk is master and wich one is slave The 4th is cap limit: windows cannot run on harddisks that are to big, like 300gb, so putting jumper on cap limit (capacity limit) makes it smaller for windows
...harddisk jumper now you are doing jumper position will be correct (jumper setting displaing on harddisk) 3rd you will doing incert the windows 98 cd and restart now you are going dos comment in win98 ...
...jumper settings on my harddisk Samsung sp0802N the junper setting on a hard drive are: Master - if this is the only hard drive in the computer, with the operating system on it. Slave - If the hard ...
barracuda hard disk 80gb I have a problem regarding my harddisk.when i install windows xp by booting from cd rom.After dos installation of winxp when it restarts my harddisk is not getting boot.I have
72 questions posted
Usually answered in minutes!
35 Questions
30 Questions
25 Questions