Lexmark C532n Color Laser Printer "bottom paper stuck tray" Questions

...it is in the paperfeed assy on the bottom of the printer, is activated. Check if there no paper or pieces of paper in the input sensor or if the input sensor is stuck in "open" position. Gerrit ...

...paper stuck in there. Sure enough, when I got to the bottom (an hour later) there it was- and it wasn't from the paper that was jammed. It must have been floating around in there waiting to get in ...

...paper. You can use up to 105 g/m2 (28 lb bond) weight for the 250-sheet standard tray or 105 g/m2 (28 lb bond) weight for envelopes as long as the cotton content is 25% or less. Envelopes with 100% ...

bottom Paper Tray. We have looked EVERYWHERE for even a tiny scrap of paper and find nothing. Help!! Check on TOP of the bottom paper tray. The NO paper sensor is "hanging" to sense no paper condition

bottom paper tray will not close check if there is paper stuck behind the tray if not look at rear for the spring that holds ithe tray in position as these can sometimes either pop off and fall to the

...that hold the paper in place in the draw snug up aganist the paper in the draw. is the bottom sheet of paper in the stack/rem of paper benton the edge. All sheets of paper in the draw must be

...bottom paper tray of my PIXMA iP4500 (Serial No.AAVY39440) is stuck in place and cannot be removed in order to load paper. How can I free up the tray? Fix for Brother mfc-440cn ...

...bottom paper tray gets stuck or caught. Make sure the printer is on a flat surface. 1. Turn off the printer. 2. Pull the paper tray all the way out. 3. Take out all the paper and then place the tray ...

...open the bottom tray when printing but it is open? open and replace with paper. That mainly happens also when paper is stuck coming from that tray. open the back of the printer and pull paper out! ...

...COPIES BY INSERTING IN THE ONE SHEET AT A TIME FEEDER. check to see if there is a torn piece of paper still in the bottom tray somewhere, its sounds as if there is still a torm piece in there ...