EliteGroup GeForce 6100SM-M Motherboard "led hookup" Questions

hookup of front panel lights and reset switch I need to know where to hook the hdd led and the reset switch and the power led. The pin block number on the main board and the pin numbers for these ...

...hookup the front panel cables (power switch, reset switch, power led, HDD led) to the front panel connector (FPIO1). Tried searching on the web and in this website. However, the link provided in this ...

...hookup I had to buy a new case for my computer. I have changed everything over to the new case, but cannot determine how to set up the jfp1 connector. I can tell which pins are for power switch, led, ...

...hookup front panel (PIII-3754LMR - AMPTRON) I am trying to hook up an PIII-3754LMR - mobo. I could really use a manual, BUT in lieu of; where to hook up the front panel pins would do. Thanks in ...

...hookup the wires from the on/off switch Hi joe, if you're question refers to ECS 945GCT-M motherboard, than goto page 12 in the manual. You'll see this Please read all of pg.12. It's my guess you ...

...hookup placement on motherboard have alienware tower. wanting to make sure i have the power switch, rest switch, led power, and hdd led in the spots. forgot to write it down when i unpluged them. ...

...LED Becuse everything is used to be properly written ur motherboard, Checkout for the lower left corner of ur motherboard.(Behind the FDD Connector's right corner) Hookup the connection by reading on ...

...hookup power,restart and hard drive led need diagram Hi, =) You can find them here towards the bottom of the page: http://www.intel.com/support/motherboards/desktop/d845epi/sb/cs-017171.htm Under ...

...hookup for motherboard 06p2525 some took all wire pluging in to board need wireing picture I am not sure who the manufacturer is for a 06p2525 Motherboard. However, Sometimes there are boards that ...

...hookup for the power switch, LED's, speakers etc. for my ASUS A7S333 motherboard that I'm instaling in a new housing. **** Hi there, if you have the use of a magnifying glass and a good torch look at ...