Question about Maxtor Computers & Internet
...Drive how to make Seagate ST3200822AS 200 GB Hard Drive into a slave drive If you are using the drives in a fairly new computer, the drives have a setting called "cable select" If these are EIDE ...
Question about Western Digital Computers & Internet
...laptop directly to be used as a external hard drive. Please rate if helpful. Thanks External USB drives connect as an external hard drive naturally. You share the drive to make it a network drive. ...
Question about Maxtor Computers & Internet
...second hard drive to the second IDE controller instead on the first controller. If there aren't any drives on the second ATA cable then the second hard drive can be jumpered as either a Master or ...
unable to access files To access the files off the hard drive another way - remove the hard drive from the case and connect it to an USB hard drive adapter and then plug it into a working computer's ...
Question about Western Digital Computers & Internet
I just plugged it in and can't figure out how to save files on it. Please help. 1. check to see if the drive shows in the "my computer" window as a new drive letter or USB drive. If it does then.... 2
will not recognize drive cashekian If the drive is not being detected this is a sign that ether you just need to map the drive or that there is a problem with the drive encloser. These links will help
Simple Tech USB Drive will not work I have a Simple Tech USB Drive that will not work. When you plug it in the lights blink, but you cannot access the drive. How do I fix the drive and get my ...
Question about LaCie Computers & Internet
can i replace the default hard drive with any brand hard drive? my hard drive had a bad sector in it, and i want it replaced. can any hard drive work on it? or do i need to buy the same hard drive ...
Question about Western Digital Computers & Internet
New 1TB My Book Essentials ext drive not recognized by laptop There are times when external drives need to be inialized and formatted before they can be recognized by a computer. There are other times
Failure id: 6bsbts-6su79v-mfpwwk-60vk03. hard drive. 1 You should set the jumpers to make the drive a slave drive. Drive 0=master drive Drive 1=slave drive. Did you format the drive? Terry
46 questions posted
Usually answered in minutes!
772 Questions
421 Questions
140 Questions