Lexmark E120 Laser Printer "smear marks" Questions

...smear marks on paper lately the printer is leaving a a few smear marks on paper Are you using genuine Canon ink carts?? The cheaper "pattern" carts often use lower grade inks that don't dry as quick. ...

...smear marks How can I clean the ink rollers? When I print I get black ink smear mark along the right side of the paper. Laser printers do not use Ink. The problem is most likely a defect on the drum, ...

...marks. I already changed the drum and all cartridges. you need check 1) you may make sure the smear occur after the photo drum unit or after fuser unit, you can stop printing when the paper goes ...

hp laserjet 2025dn. Yellow smears mainly in the center of printing paper. It betan when yellow toner was marking low. I changed Yellow toner cartridge and the smear is stronger. hi try cleaning the ...

Can smears when priting be fixed When printing there are three dots on the left hand side of the paper and now there has been black smears with each print. I changed the printer cartridge to see if ...

...not move easily. The guide rod/rail as the name implies is the provides the path of motion; ink smears on the encoder strip. The encoder strip is the long narrow plastic with barcode like

Lines on copies Lines and smears keep appearing on each copy. I replaced the cartridge toner, but they are still there. I even cleaned the roller on the cartridge holder. Looks very unprofessional ...

...I can still read the printed page but the SMEARING marks are very obvious Vertical Smear indicates ROLLERS. Clean the rollers. Most printers has a rear cover that you can open to reveal the

Smearing on the bottom half of the page My printer is brand new - had it for 2 weeks. All of a sudden, I get a "smearing" starting at the middle of the page and getting worse towards the end. I have ...

hp laserjet 2200d It prints a line, like a smear the entire lenght of the page on the left side approximately two inches from the edge of the paper. We have replaced the cartridge thinking that would ...