Niko SV-3706 37 in. LCD Television "change input signal" Questions

Ad

Question about Televison & Video

2 Answers

...change the input using the video source or input button. For example, if your Satellite is hooked up to your tv using Red, White, and Yellow cables then you need to change the input to Composite or ...

Ad

Question about Dynex Televison & Video

1 Answer

...the input to a selection that does not have a signal. Look at where the cable goes into the TV, this should show the name of that input, then change input back to that exact one via your

Ad

Question about Proview Televison & Video

2 Answers

to HDMI input 2 or 3 and recheck for signal. Your T V remote will have an input selector to change between the different inputs on your T V. The TV can not detect an input signal on the selected input

Question about Sanyo Televison & Video

1 Answer

...signal for the TV to decode. So you've either disconnected a cable somewhere or turned off your input device. Try changing the inputs on the TV (this will be a button saying input or A/V) Try ...

Question about Vizio Televison & Video

1 Answer

...change the input to whatever input you are using from a source device. As long as you change it to anything other than RGB. Your television is essentially a big computer monitor with multiple inputs ...

Question about Philips Televison & Video

1 Answer

...Change the input setting on the tv not the remote. If you are using a universal remote it may not be programmed correctly. When you push the input button on the remote it is changing it to the Over ...

Question about Televison & Video

1 Answer

...signal from box, it was good. Changed TVs, other worked fine. Is there something in the TVs program that could have gotten changed? Yes, something could have gotten changed. Confirm what input ...

Question about Philips Televison & Video

1 Answer

...change the input channels, it says no label in the upper right corner and then it comes back to saying no signal, it does this everytime the input button is pushed to try to change the input channels ...

Question about Westinghouse Televison & Video

1 Answer

...input from a computer, if you do not have a computer connected, then this is why it is complaining of no signal. It will not automatically defer to normal TV without being told to do so, have a look ...

Question about Proview Televison & Video

1 Answer

...the input on the LCD to the input you are using?  If you are in input 1 then the LCD must be on input 1 to receive signal. Current tvs have several inputs and must be changed on the setup

Not finding what you are looking for?
Niko SV-3706 37 in. LCD Television Logo

14 questions posted

Ask a Question

Usually answered in minutes!

Top Niko Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Niko Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...