HP Deskjet D4260 Printer "paper sensor" Questions

...there is a paper sensor in the paper tray , it will detect where paper is present or tray is empty. may dust cover the sensor, clean the dust on sensor and check where the sensor is working or ...

my print paper tray not work Contact the dealer and replace the paper tray/// The Paper Sensors (Plastic sensors - lifting type) inside the printer connected to paper tray might not be working ...

...sensor to open ( paper passes the sensor ) at a very specific point in time. If the paper did not get picked up from the tray, then the printer will ASSUME that the paper must be jammed somewhere ...

...paper sensor somewhere either to sense paper in the holder, or to sense as a sheet is pulled into the printer. It is likely there is a plastic finger which contacts the paper, and the other end of ...

...and check the path of the paper where the paper is dragged. clean the sensor or switch that is found at this section. If there is not response you will need to open and check if the sensor

...which shows paper jam recovery. the sensor of your printer may be jammed. clear the jam and it will work. 2. if not, there may be a small piece of paper near the sensor of your printer. clear

paper jam always getting a paper jam with no paper jamed. hi loadpacker- sometimes printers have testy sensors that think there are paper jams when there are none. other times products can have tiny ...

paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor

...paper sensor , the voltage of the sensor changing . but the paper stop randomly any where and the paper is flashing .Do you know a way to download a firmare for that model? thanks visit the ...

...load another paper and start to print the document. ing.there is a light sensor in the carrage unit to check the paper. if the sensor is not working it will eject the first paper and then start ...