SanDisk Sansa Shaker SDMX9N-512 MP3 Player "buttons clip plus work" Questions

...buttons and menus work but when turn the player off it reboots itself in about 2sec and starts to play again???????? Have you tried a hard reset? Insert a paper clip in the tiny hole at the left hand ...

...buttons. Try holding the power button down for an extended period of time. If this does not work, there should be a small hole on the side of the device that will reset the player. You'll need to use ...

buttons work and I cannot shut it down. ZEN V ZEN V Plus (DAP-FL0036) Turn off your player (if possible). Push the end of a pin-like object (for example, a straightened paper clip) into the reset hole

my son's mp3/4 player (zen) just stopped working. it won't turn on at all. Reset button - small hole to left side - use paper clip to poke it. Then make sure its charged

plus player has a blank white screen We opened the player yesterday and put the mix clip in to watch a movie and the screen went white and blank and now we can not do anything. I had the same issue. I

the player with an opened paper clip. or hold the voice recording button on the side. or hold the two buttons that are not the joystick thingy.( one is a backwards arrow, the other is the one above it

...plus is stuck in shutting down i plugged my zen into the computer to charge, unplugged and tried to shut down, this was over an hour ago and its still 'shutting down' I have tried to plug back in to ...

...Plus Frozen on the product title screen The product logo screen is frozen. I have tried the reset with a paper clip and performing other suggestions I have read about on this site. Still frozen. The ...

It just stopped working after I had charged it It wouldn't turn or even respond to the pc or hiitting the rest button I plugged my zen V player back into the pc, used a paper clip on the reset button,

plus side, nothing has broken off either :-) ) I too had a problem with the headphone jack. It took me a while, and a few scratches on my Sansa C140 case, but I FINALLY figured out how to seperate the