Question about Sharp Aquos Televison & Video
times and remote power button press 10 or 12 times,it time to replaced the tv Tuner signal board.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish tv Tuner signal board for the replacement
Question about Sharp Aquos Televison & Video
...TV. Press "TV Power" on the remote control to power up the TV from stand-by mode. If the power light on the front of the television glows red when you press "TV Power" on the remote, press the "Main ...
...you will get flash light in mobile.It means remote is ok. Press On/Off switch from LED Tv and checked tv is on or off. If Green light is blinking but tv not getting on follow as per attached
Question about Sharp Aquos Televison & Video
...tv, the power light turns on and about 2-3sec the power and opc light start to blink and thats about it. How are the power and opc lights blinking? Do they blink simultaneously or does one blink then ...
Question about Sharp Aquos Televison & Video
...power supply and reset still on light no sound just a flashing green light Remove Mains Plug and press Standby switch from LED Panel for 30 sec. Press Input & Ch Down Switch from LED panel and ...
Question about Sharp Aquos Televison & Video
...press TV POWER on the remote control to turn the power on. IMPORTANT: IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ...
...all the input is the cause to this problem. you can try to reset the tv by disconecting it from the power outlet, then press the power button on tv (not on the remote) and hold it down for 30 ...
...be configured for DHCP service.) On the TV remote, press the 'aquos net' key 2-3 times to switch the TV to web mode. If you get an error message, your router is probably not configured
press the power button on the remote, the TV light turns green and then immediately goes to a flashing red light. I have also tried using the master switch on the TV (a solution that has worked in the
Question about Sharp Aquos Televison & Video
...tv still only have green flashing light no sound no lights.do have 5 volts coming out of board Remove Mains Plug and press Standby switch from LED Panel for 30 sec. Press Input & Ch Down Switch ...
1,180 questions posted
Usually answered in minutes!
339 Questions
295 Questions
241 Questions
202 Questions
163 Questions