...cover page; the document and a single blank page. Was on chat with HP and they said it is not an HP problem, but a Word problem! Any help out there!!! hi, i would like to know if you have an HP ...
Question about HP OfficeJet Office Equipment & Supplies
...print 5-6 copies before stopping. Most faxes come thorugh fine. Just a few problem faxes... Any info on the Error Code and any info on a fix? HP Officejet 9100 All-in-One Series - Changing the Fax ...
Question about HP OfficeJet Office Equipment & Supplies
...need to print and then fax. If your PC has a Fax modem, you can find a faxing software to allow you to fax straight from the PC. ...
Question about HP OfficeJet Office Equipment & Supplies
...need to use the fax and every time I attempt to fax something it sounds like it is dialing and going to connect, but it does not. I am so frustrated, I have tried everything that I can think of. This ...
Question about HP OfficeJet Office Equipment & Supplies
...need to open the lid and press ok. Then printer releases page and sounds like it is resetting itself. Very annoying to have to keep opening cover and pressing ok to finish fax, print or copy job. ...
...print, you may need a cleaning, or you may need to replace the toner or drum cartridge. If it's an inkjet machine, there's a possibility there is some ink or grease on the encoder strip (a small ...
Question about HP OfficeJet Office Equipment & Supplies
cover like you are going to scan a book on the lft side you will see a strip of glass separate from the larger piece. This glass is the area use when you use the paper feed assembly. Dampen a piece of
Question about HP OfficeJet Office Equipment & Supplies
...need to clean the print cartridges. If the black line is missing, faded, streaked, or shows lines, this might indicate a problem with the black print cartridge in the right slot. If any of the color ...
Question about HP OfficeJet Office Equipment & Supplies
...need to remove the line card, you'll have to remove the remaining covers, one screw located at the front of the power supply, four screws that hold the printer assembly in place, one screw at the ...
PRINT HEADS AND ALIGNED THEM. ANY OTHER OPTIONS? THANKS Solution one: Reset the product If there is static interference, or loose connections with the product, this can result in bands or lines in the
954 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions