HP Photosmart C6180 All-In-One InkJet Printer "sponge" Questions

...in the center.then with the tissue paper place it internally on the side from where its leaking.the sponge which collects the wastage ink is at present got full and now it does not have the capacity ...

...black ink out the bottom of the case, below where printer head parks. Otherwise works fine. Its a sponge in the drip tray underneath the print head. It tends to fill up, especially if you're ...

...Find where your cartridges are usually located, when they are not printing. There should be a sponge there, which is probably full of ink (that's normal). All you need to do is wipe your

Every time i install a new ink cartrige it lasts about 4-5 days and i get color jet fail. Why? Sounds like the cleaning sponges may be full. I would not be surprised if you where seeing some smudges ...

...so pain in the **** carriage error. Look this error up and follow the directions for checking the sponge beneath the black carriage. When I started experiencing a problem with swapping cartridges I ...

...heat gun. Then inject the ink through one of the holes and hope you don't get an air bubble in the sponge. Do not allow ink to float on top of the sponge as the cartridge will not

...cord from the back of the all-in-one. Raise the lid. Clean the glass with a soft dry cloth, or a sponge slightly moistened with non-abrasive glass cleaner or water. Dry the glass with a chamois, ...

...sites that refill cartridges, they'll tell you how to reset the "ink left" memory. the ink is in a sponge inside the cartridge. it flows by gravity to the printhead. the sponge is an open celled

...you should see a foam/spongy product resting in the base of the printer. The purpose of the sponge is to absorb any ink that escapes from the cartridges. Herein lies the problem: over time,

...a short life, is that they do get gummed up with ink goo. There is a home position where a large sponge soaks up ink from the print head as a way to purge the ports. Over time (like a year or