Canon XH A1 Mini DV Digital Camcorder "power board fuse" Questions

Canon Xh a1 won't turn on, HDV and Power are blinking tried the lock unlock It could be the blown fuse that located on the main circuit board.

...power board. If you hear a "pop" sound, you have blown couple of fuse along with some other components. When a small fuse blows you cannot hear any sound. Camera needs a new power board and repair ...

...see any fuses. Maybe a link has burned out. Any info woule be grateful. Also whether it is a common defect. There is a fuse on the power board that could have gone faulty, or the power board

...the power panel board behind the battery panel. open carefully and check , if fuse is intact then you might need help from Sony service as the main board could have a possible regulator or IC

...board up to where the power supply goes, on the mother board several fuses lays, if any of it open should replace with the same ampere fuse, voltage regulator SMD could be faulty, if you don't get ...

...transformer is damaged & that;s why its not supply the power to the main circuit board. Also make sure the battery is working condition. How about the DC power ? Is that working on Power

...is directly soldered to your circuit board. It is not a user replaceable part. You'll have to send it back to JVC to replace. In the future, what you need to do is power off when changing the

...See if the main board is getting power. Then check the fused on the main circuit board to see if they have unregulated voltage to them , They all say 14 on them for 1.4 amps. Larry's ...

...it to clear it. open the cam, check the power supply on the main board, there is a small fuse on the circuit board test it with. eventually we have to suspect the mother board. if so should change

...with the rear power board working it's way loose and unplugging itself from the main board. these units have alot of solder connection issue due to sony's use of poor solder back in the earily ...