JVC Everio GZ-MG130 Camcorder "flip video works fine lcd" Questions

...flip out LCD screen. When it says the Video Management file is Broken... Message push in on the little joy stick and that will fix the broken file and all will be well with the world again... Also ...

...flip video camera. It used to work just fine. Now when I turn the power on, the screen is blank white. If I press the play button I can hear the audio of the last video, but nothing appears on the ...

...fine for 2-3 years but suddenly stopped working. If i flip open the LCD screen then the viewpoint also goes blank. Is there some setting that needs to be adjusted? If i have to change the LCD screen ...

...flip out screen dose not show up anything but if you touch it you still can use the buttons on it I had purchased SONY DCR HC 42 in july 2005. now i am facing a problem with the LCD display. whenever ...

fine, but if you flip it back to rear faceing the display is upside down. Is there a way to fix this? flip switch is not working or stucked, a loose wire connected to this switch is also possible. you

works fine but the LCD view will only work when it is flipped to the front to use like videoing yourself. When it is opened normally and turned toward the camera operator, it stays black and doesn'

lcd screen scrolls continuously when powered on and has grey lines, some times if you turn off and on will work again. Everthing else workinf fine also have a new pc windows 7 where can i download all

...fine until a couple of months ago. Will you help me please? I have the same problem and it goes away when i completely flip the display. It looks like the inside ribbon cable need to be replaced.Good ...

...flip the panel to watch yourself while you video yourself, the picture will be upside-down, although you don't need to worry about it being recorded properly, of course. It's just a pain to aim the ...

...flip the camcorder into VTR mode 7. tape should automatically eject This is another method: 1) Put camera in record more 2) push door shut and hold it shut while removing battery 3) While still ...