HP Photosmart C7180 All-In-One InkJet Printer "ink dry printed pictures" Questions

...ink flow, remove the nozzles from the water and dry it with a soft tissue. If that doesn't help, you might have some air left in your cartridge: try inserting air in the syringe and blow it in one of ...

...year and when i decided to recently, i was not able to see my picture. The printer is in motion and ink is full but the printer paper comes out clean white. (The ink is about a couple months old). ...

...ink left). Then dry each of these areas with a dry cloth. Take another damp cloth, and wipe the contacts inside the printer. Work from top to bottom on these contacts. Dry the area. Replace the print ...

...ink that's in there). If the printhead is dirty, open the list of system printers (in Windows?, look in START menu→Control Panel→Printers and Faxes), right-click on the printer, ...

...ink lines or a portion of the PRINTHEAD* could be dry, so you should first perform a "Clean PrintHead" procedure from your printer's 'TOOLS' button on the control panel. NOTE: If one or more the ...

...dry and then reinstall it. Clean all the nozzles of the ink tanks (cartridges) using a cotton swap (bud) dampen with cleaning solution (if you don't have a cartridge cleaning kit, don't use any other ...

ink. One picture printed fine, then suddenly the next seemed to put excessive ink on the photo paper, leaving a distorted picture. The ink is so heavy that it never dries and leaves spots of ink on my

...if there is some real physical problem. In my case it was unused long time without cartridges and black ink was completely dry inside of printhead. I opened it carefully and dissolved it with

...ink cartridge in before this happened. We replaced it, and cleaned all the contacts on the others. Any ideas. Should we be using the re-manufactured inks? Occasionally printer cartirdges can clog and ...

pictures come out red Check the ink levels. if other colors have dried up or spent, and only RED color is in the cartridge then it'll look like that. Try a printing a test page after calibration.