Canon PowerShot A630 Digital Camera "flash bulb" Questions

...flash setting to "On" instead of auto, it still does not work. Maybe the bulb is broke? Please help! You are correct in saying that the bulb needs to be replaced. Take the camera to any camera shop ...

...flash bulb is probabally out. Is there anything I can do without having to replace the bulb? My wife's A550 stopped its flash for no good reason. I put two fresh batteries in and there was no ...

flash not working hoe can you tell if light bulb is burnt Hi Tamara. Only a technical can tell, when opening the flash. (In your case the whole camera.) Sometimes, when you look very good, you can see

Canon PowerShot SD200 Flash doesnt work Canon PowerShot SD200 flash doesnt work. Is it fixable? Icon of flash is visable on screen, but no flash when taking pics. change the flash bulb

flash picture, no flash. The lightning bolt symbol blinks, but no flash. With the SX130 I've seen that before, it seems to be caused by the bulb burning out. Your best bet will be to contact Canon

...go to manual mode and then enable the flash. if it not works there are two reasons both internal either the flash bulb has blown. else the control signal is not reaching and hence get it

...take picture. When I disable the flash, then I am able to take picure. the flash bulb must have gone dead. just need to replace it. the service center will do it in a couple of minutes. do not ...

bulb or flash circuit. The flash circuit can be replaced easier than tring to solider on another bulb those thinks can sometimes be a pain.The flash circuit is normally held in by two screws after the

...flash bulb can blow at any time. The rest of your camera might be state of the art, but the flash bulb itself is relying on some pretty old fashioned technology. Unlike a light bulb, however, ...

i have to turn off the flash or it says charging flash? This message truely indicates that the flash is charging however you couldn't get it to flash because the bulb needs to be replaced. Hope helps