Question about Canon PIXMA Office Equipment & Supplies
...Close the top cover. 7. Try printing again. If you still cant communicate try with new cartridge . Hope this help. Please Rate My Response! Thanks! CF To solve the printing problem.. # Hold the ...
...Close the Inner Cover. CAUTION: Press the center of the Inner Cover until the cover locks into place. Return the Scan Unit to its original position. The LCD displays a message asking if you replaced ...
Question about Canon PIXMA Office Equipment & Supplies
...cover Step three: Align the print heads Whenever you insert or replace a printhead, the printer automatically aligns the printheads to ensure the best print quality. If the printer does not print the ...
...cover. Remove the protective sheet from the drum cartridge. To insert the drum cartridge, push up the lever on the right side of the printer. With the lever in the upright position, hold the drum ...
cover The printer should align the printheads automatically in a few minutes, printing an alignment page. If it does not, go to the next section to align manually. Align the printheadsIf you installed
Question about Canon PIXMA Office Equipment & Supplies
...Close the cover and reconnect the cables before turning the unit back on. If you need to replace the drum unit, order DR-20. For changing the drum follow the above steps through removing the drum and ...
...cover of your printer. The Cartridges will automatically come in center. Pull up the holder lid and carefully remove the print cartridge on a 60 degree angle. Press the ink cartridges into the slots ...
align the arrows on the drum cartridge with the corresponding arrows on the printer. Guide the cartridge in until it snaps into place. 3. Pull down the lever on the right to lock the drum cartridge in
Question about Canon PIXMA Office Equipment & Supplies
...cover. Pull cartridge toward yourself and snap it out. Do the same in reverse order to fit new cartridge. Remember to remove cello tape strip from new cartridge nozzle. Do alignment procedure after ...
Question about Canon Office Equipment & Supplies
...cover. Wait until the print head holder has stopped moving. Check the lock lever to ensure it is in a down position. If the lever is not down, individually remove each ink tank. Lift the lock lever ...
528 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions