...and it was far down inside where i could not see it.and it was stuck in the bend of the paper feed after tearing it almost all the way down i finally was able to see it removed the coin and it
Question about Canon PIXMA Office Equipment & Supplies
...feed. Says there is a paper stuck, but there isn't. Do I need to clean, and how do I do that? Have even tried dust-busting the ******, and there is nada in there to block the feed. Hello You might ...
stuck from the one side it feeds. It worked fine untill now. it maybe one of the feed wheels are jammed, if you can get it apart then have a look at the gears and wheels, there maybe something jamming
...feed slot until it comes right through the printer to the back of the exit rollers. 9. Move it up and down first, and then slowly move it over to the right side. If something is stuck under the black ...
...feed tray for any visible stuck papers and remove them manually. access the cartridges compartment and look for any stuck papers here.manually remove them. connect the printer and the pc and power ...
...feed rollers One of your jam sensors may be stuck in the actuated position by a paper scrap or dust, giving a jam code to your printer. There are usually two sensors, one where the paper feeds, and ...
Question about Canon PIXMA Office Equipment & Supplies
stuck in the narrowed area right before the feeding rollers. Disconnect the cables and rotate the printer in a way it stands on its back. Open the front cover. Use long thin flat screw driver that can
feed correctly the paper seems to be pulling to the right and then getting jammed. I have tried to see if there was any paper is stuck but can not find any. Could it be that the rollers need replacing
Question about Canon PIXMA Office Equipment & Supplies
...is feeding in on right but not on left so just screws up Try turning over and shaking to see if something is stuck in the feed area and try feeding from the bottom tray if the top roller is worn
Question about Canon PIXMA Office Equipment & Supplies
feed sideways if so there is something stuck in the feeder, here what you do fold the bond paper into half then feed it manualy open the cover of the printer so you can see the paper pass through push
2,715 questions posted
Usually answered in minutes!
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
1,216 Questions