Question about Canon PIXMA Office Equipment & Supplies
print head like you are going to replace ink cartridges2) Remove all the ink cartridges. Turn off the machine. Put a piece of tape across the felts of the ink cartridges keep the ink from drying.3) To
Question about Canon PIXMA Office Equipment & Supplies
...PRINT HEAD WITH KNOWN GOOD ONE AND RECEIVED THE SAME INDICATION. WHERE DO I GO FROM HERE? more than likely the slot in your carriage assembly is faulty. try cleaning the contacts on the carriage ...
Print head carriage drive belt failure.[hp deskjet 710c] there is a rubber belt that moves the head from left to right if its broken it needs to be replaced or if its just got loose open the sides of ...
Question about Canon PIXMA Office Equipment & Supplies
...print head requires replacing, it has disintergrated. I can not find the part on the net, will the belt from another model compatible? Is it worth the effort of repairing even? The 710 is a very old ...
Question about Canon PIXMA Office Equipment & Supplies
...print perfectly for the first 2/3 of the image, then rapid fade to all white. Checked paper, replaced printhead and cartridges - no change hey its machanism problem, the belt provided to moved the ...
Question about Canon PIXMA Office Equipment & Supplies
...replace all 4 ink heads and all 4 ink cartridges. Every time I print a test page or any doc I get a shadowed imaged (dubble image). I ran the ink head alignment many times, but gives error. sounds ...
Question about Canon PIXMA Office Equipment & Supplies
...print gets cancelled??? Try removing the screws from the back door on the Ink Supply Station (sometimes they catch on the carriage - the printer does not need the screws) Look under the carriage belt ...
Question about Canon PIXMA Office Equipment & Supplies
...print head seems to not return quite where it needs to be. What part would I need to replace? Clean the printer Clean the drive rollers with alcohol Check the belt for wear Clean the rail that the ...
Question about Canon PIXMA Office Equipment & Supplies
...print head belt on my HP DesignJet 500. Now I get crooked lines and I get traces of colored lines on a chart that is supposed to be all black. Any ideas? Visit this HP page for alignment instructions ...
...Print Head Path Error 2 is a worn out carriage belt. Open the top cover and locate the carriage belt. It is the long thin belt that extends the full length of the plotter. Use a light and look under ...
1,272 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions