Question about Kodak EasyShare Office Equipment & Supplies
...calibration sheet face down on the scanner glass. For the 5300 AiO printer, place the sheet on the front right corner of the scanner glass. For the 5500 AiO printer, place the sheet on the left rear ...
...3-Try a removal and reinstall of the printhead and inks If all this fails, call Kodak Aio support : 1-800-421-6699
Question about Kodak EasyShare Office Equipment & Supplies
kodak aio 5100 all in one just prints red/pink Tried to calibrate-unsuccessful. Tried new cartridges, then calibrated - unsuccessful. Printhead cleaning - through software, calibrate - unsuccessful. ...
...a bunch of little icons. There should be an icon that looks strikingly similar to your Kodak 5100 AIO printer. Double-clicking this icon will bring up the printer's status window. In the top ...
Question about Kodak EasyShare Office Equipment & Supplies
...the printer by doing the following: 1. Open up Kodak AiO Home Center from the desktop. 2. Click the "?" on top right corner and go to maintenance. 3. Click the "calibration" and follow
...print I changed cleaned calibrated everything and black ink won't print I have a kodak 5300 aio printer pictures are not clear even after installing new ink cartridge and cleaning print ...
Question about Kodak EasyShare Office Equipment & Supplies
...downloaded firmware, still won't print correctly, words barely show, pictures fuzzy kodak 5500 aio You need a new printhead. Contact Kodak and they will send you one free of ...
...calibration sheet. After that, in the menu, do a printhead clean. Do one basic and one deep. Print a demo sheet to see if anything has changed. If the picture looks better, continue to do cleans. In ...
Question about Kodak EasyShare Office Equipment & Supplies
...AiO performs a calibration every time you install or replace a printhead. However, you can run a calibration if you are seeing changes in the image quality. Calibration aligns the printheads and ...
...is "New Printhead Detected, calibration require, load paper and press start" it will require you to to do a calibration. hope this will help Mark S. Kodak AIO Technical Support Hotline ...
1,223 questions posted
Usually answered in minutes!
996 Questions
812 Questions
74 Questions
69 Questions
51 Questions