...not power up. Power light stays on for about 30sec then blinks Hello Friend, 1> Make sure the DVI connector is securely connected. 2> Unplug the power cable from the monitor few time. 3> ...
...not power on ensure that there is power in the socket and check that the power cable is firmly fixed to the socket. if power does not come on then switch off, remove the power cable from the socket ...
...not power up Hello, If your television will not power up, there is just one problem related to this, and that is the power panel. But before You confirm it is the power panel, You will have to run a ...
Question about Televison & Video
...not power on. Red light flickers sometimes when I try to turn it on. TV Will Not Turn On - Troubleshooting Help for Finding ... ? 2:32 https://www.youtube.com/watch?v=kEDVc-BXf0I May 1, 2014 - ...
...not power on Hello, Once your television is not powering up, then there is a problem with the power panel of the television. First try to connect the television using another power cord to see if it ...
Question about Dynex Televison & Video
power ie AC is not reaching the TV or the power supply section inside the TV has broken down. Your guess is right about the power cord and the power unit within the TV.The Problem will be there within
not turn on. No power light I pressed the remote power button to turn the set on, the indicator (red) light changed to green, but the picture would not come up. I pressed the remote power button again
...Not the power supply board,it the Tuner board that take in the comming broscast signal that have the problems.You still can used this tv.Push the power button sometime the tv it will work right ...
...not power on. Problem began when screen froze and TV would not power off remotely or manually. Power cord was unplugged from back of TV for >30 seconds. Power cord was plugged back in and now TV will ...
3,065 questions posted
Usually answered in minutes!
610 Questions
478 Questions
339 Questions
330 Questions
245 Questions