...screen having a green tint when I first turn on my TV but eventually the full picture would come in. Any advice? The screen flicker than go blank,does it still have power to the tv set?Yes,than this ...
...screen with comcast difital cable. The TV worked fine last night but when we turned it on this morning we had audio and could see wraps and screens provided by comcast but the programming reflected ...
...screen. The issue will go away permanently after the TV has been on for a significant amount of time (> 30 minutes). I have already tried to replace the main board and that had no effect. The back ...
Question about Samsung LN Televison & Video
...screen. I want to know what the problem is. Samsung made a bad TV, the new part is $1200 I have the same issue. it is a blurred picture from left to right after about 10 min it goes away. (18 month ...
Question about Samsung LN Televison & Video
...screen to darken,or the color go floresent. Also check the power supply for bad caps. when you have it apart.They usualy go bad on these tv's. It will cause the tv to take longer to come on.Or you ...
Question about Samsung LN Televison & Video
screen has dark sections in it Tv will click several times before it goes on. TV will develop black sections in it and blurs, then clears up It sounds like the power supply board is beginning to fail.
...tv on and off for like one hour,eventually the screen will come on normally,for a couple of days the tv will come on normally but some times like a week later it will give me the same problem...Also ...
Question about Samsung LN Televison & Video
...screen Hi. I have a Samsung LN-R328W LCD TV. A dark blue or black very thin line appears exactly in the middle of the screen, from top to bottom. Sometimes it disappears, other times it flashes and ...
screen blacks out. I have to restart the TV to see the picture again. Any help on this issue will be appreciated. Sounds like a backlight going bad or possibly the inverter. Check each backlight first
screen) however, t-con board that is part of lcd panel could be defective and cause of these symptoms. T-Con board is located at top center of cld panel at rear and would be covered with metal shield.
89 questions posted
Usually answered in minutes!
357 Questions
285 Questions
270 Questions
256 Questions
175 Questions