Question about HP LaserJet Office Equipment & Supplies
...off the power, unplug the power cord, wait 10 seconds, then turn the power switch on (with the machine still unplugged) and wait 5 seconds, turn the power switch back to off, and the plug the power ...
...off power press and hold * and #, turn on power, wait 20 sec and release the buttons. If printer not goes to ready, disconnect power cord when printer initialize and turn off power switch. reconnect ...
...OFF, press power button to turn it ON. Semi-Full reset Remove the ink cartridges. Remove the power cable from back side of the printer while its ON. Press and hold "#" and "6" button, while holding ...
Question about HP LaserJet Office Equipment & Supplies
my hp 3330 printer has a scanner error msg. and off power on power off power on power, also the phone light on the fax side is blinking and the cancel light what do i do replace the toner cartridge
Question about HP LaserJet Office Equipment & Supplies
...power off Any thoughts on this issue, as HP stopped support. Thanks in advance for any assistance that you can provide! Regards, David do you have an extra LJ4? if yes try interchanging the power ...
Question about HP LaserJet Office Equipment & Supplies
...off after power surge 5 days ago HP2727NFS perform a POWER DRAIN. Steps to perform a power drain. 1. Switch off the printer and remove the power chord from the wall jack. 2. Remove the power chord, ...
Question about HP LaserJet Office Equipment & Supplies
...off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If a surge protector is being used, remove it. Plug the device ...
...off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the all-in-one directly into the wall socket. 3. Check the cabling ...
power off then on. It is an internal embedded software error. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize.
...off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product ...
274 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions