Canon PIXMA MP510 All-In-One InkJet Printer "mac scan" Questions

...Mac ready to scan. You can also try going into Preview (the Mac app) and from the file menu select Import... and it should open a scan window. Hope this helps! We are having a dog of a time!!! Now ...

...Scan... et voila! NOTE: after putting my Mac in slep mode, the scan button didn't function, but all I had to do was switch the MP450 off then on again for my Mac to recognise it. Hope this helps! J

...scan. I switched to Mac from PC recently. If that's the problem, what do I do? Tks. Did you install the Canon software? Most canon's will print without any software being installed on a mac. Scanning ...

...scan to computor (Mac 10.5.7) The window 'processing calibration data...', and the window 'scanning. Do not open...' shows but no scanning takes place. not sure with mac, with windows is usually ...

scan the papers? If you are still in need of a solution: You need to make a visit to the canon website and install the drivers for the MAC os onto your laptop...use this link: http://www.usa.canon.com

...Scan... et voila! NOTE: after putting my Mac in slep mode, the scan button didn't function, but all I had to do was switch the MP450 off then on again for my Mac to recognise it. Hope this helps! J

...scan from a canon mx330 to an Imac with Mac 10.6.8? Step #1 - Have the printer powered up and plugged into Mac.Step #2 - Open "System Preferences" and the in the "Hardware" selection select "Print ...

...mac The scan driver, print driver and software for mac (OS-X) can be found at the following page on the Canon website. Follow the link... ...

scan a picture and I can't figure it out I have a MAC :) Yes Hi  There are 3 possible routes. 1 use the scan button on the printer. It should initiate a scan and then send it to the computer

scan you are doing.'' When I do this it says 'cannot communicate with scanner. Cable may be disconnected or scanner may be turned off. Check status. Scanner driver will be closed. 155.0.0. I can print