Canon imageCLASS MF6550 All-In-One Laser Printer "remove tabs" Questions

...properly set or there is some paper jam. so please follow the instruction and open the panel and remove the toner and check for any kind of paper piece and than refit toner properly and close the ...

...Properties.On the Drivers tab, click the printer driver that you want to delete, and then click Remove.for windows vista or windows 7 it is much more difficult, so i will send you to a webpage ...

...question but I am electronically disabled. When installing toner cartridge for MS3200 printerdo you remove tab A and the attached tape and discard or do you let it dangle? Pull it completly off and ...

...Printers applet in control panel and select File/Server Properties and click the Drivers tab. Then remove any and all drivers for the i860. Now run the installer and plug the data cable into the ...

...remove the cover, look for 2 small clips one at each side and unclip the cover and gently lift upwards. Under the cover on the left side you will see a small plastic rod which goes from the left side ...

Paper Jam Cannon MF4150 paper jammed.. Opened cover removed paper, also removed back cover and found no paper there. Still getting paper jam error. I have just had the same problem on one of these ...

canon lbp7660cdn How do I fix this error? Toner cartridge keeps giving 'remove all packing'. I have tried 2 cartridges and get the same. Help? Carol, Did you remove the sealing tape? There should be a

paper comes out with nothing on it i replaced the cartridge 2 times and i still get a blank paper come out when i print out also blank paper comes out no jam, no error just a blank paper any ...

...that may still be in place on the left side. Pull the shipping lock out, if present, and discard. Remove and reinstall the cartridges to make sure they are properly installed. Lift the front center ...

...all the paper from the paper tray, I found that actually there is a paper got stuck in the tray, I removed that paper, then put the paper back in the tray, then it worked. I had this problem pop up ...