Xerox Phaser 8500/DN Printer "stuck powering" Questions

8650 waste tray stuck The waste tray will not come out of the printer. Is there a way to get it unstuck? Power off the printer and wait about 10 minutes. Power back on and try to remove it when you ...

Paper tray stuck Paper tray is stuck cannot open to refill. On power up red LED flashes and message "Replace paper tray". How can i remove the tray On the Brother DPC130C Take off the back cover, sort

...the printer off and on.This automatically exits the paper from the printer.You can also remove the stuck paper by gently pulling it out straight.If there's no stuck paper,clear any print ...

...was only off for a second and turned back on. The printer turned back on as well, except now it's "stuck" and keeps showing the red light. The screen is also not being displayed. Can anyone help ...

...won't initialize At power-up display shows xerox logo then 3-4 seconds reintializes like it is stuck in a loop. Although I dont know this particular model, I will answer with knowledge of ...

xerox 8860 stuck in inialize Drum doesnt heat up. No error messages displayed. Could this be a power supply problem Sounds more like an NVRAM issue.

The printer will power on but the screen on the printer says self test complete Initializing and its been stuck there HELLO

...s an Issue related to a sensor that's under the toner cartdrige when that sensor it's dirty, it got stuck and make the machine thinks it has a jam when obviously there's nothing there hope that i ...

XEROX Phaser 8560MFP won't go past "initializing?" It is stuck at "initializing." What to do with this boat anchor! Disconnect the data cable between the Electronics Module and the Printhead to see if

...of 2 things is most likely, Either the machine shut off via a power failure and the Wiper Blade is stuck to the print head, or the print head block is very dirty. That code is caused by the print ...