...block and clean it.2. Check to see if any of the print head harnesses are causing the print head to bind.3.The cleaning blade may be stuck to the print head if the printer was not shut down
...print?! It means the printhead is stuck in the tilt position by the tilt arms. If the process motor gearbox is out of sync, it'll cause this error. Steps to resolve: Reboot the printer. Verify the ...
Question about Xerox Phaser Office Equipment & Supplies
...stuck in the tilted position or is not able to tilt forward to the print position, due to problems: Has ink spilled ink around the printhead that prevents it from moving to its center position? You ...
Question about Xerox Phaser Office Equipment & Supplies
...stuck in the tilted position, or is not able to tilt forward to the print position, due to problems. 1 Reboot the printer. 2 Repair or replace the Printhead Restraints. 3 Has ink spilled ink around ...
Question about Xerox Phaser Office Equipment & Supplies
Xerox Phaser 8400 first page blurry Xerox Phaser 8400 printer. There's a fault 37,004.40. so i replaced w/a new printhead, a wiper and a drum temperature sensor,cleaned drum encoder wheel and i tried ...
Question about Xerox Phaser Office Equipment & Supplies
...stuck in the tilted position, or is not able to tilt forward to the print position, due to problems. 1. Reboot the printer. 2. Did this correct the problem? Complete. Go to Step 2. 2 1. Do the ...
...stuck in the tilted position, or is not able to tilt forward to the print position due to obstructions. Has ink spilled around the printhead that is preventing it from moving? (you should be able to ...
Question about Xerox Phaser Office Equipment & Supplies
stuck in phaser 8560 1. Make sure you are feeding the labels from the bypass tray, not from the cassette.- 2. Make sure the labels are for Laser printers, not Inkjet printers. 3. Do not try and re-use
Question about Xerox Phaser Office Equipment & Supplies
...print head is not moving either from front to back or side to side properly. Normally a very easy, and quick repair. Honestly I would call and have them do it. The error you are receiveing is due to ...
stuck in the tilted position, or is not able to tilt forward to the print position, due to problems. Do the printhead lock arms rotate correctly. Has ink spilled ink around the printhead that prevents
548 questions posted
Usually answered in minutes!
284 Questions
262 Questions
152 Questions
147 Questions
158 Questions