doesnt work. Do you have a new toner cartridge loaded? The red/orange light will blink when toner is low, even if everything else is working fine. Try printing out a test sheet and see what that tells
...doesnt work and you still have that error message, then remove the fuser and check the impedance, if its below the required level(i dont know whats the required impedance is), then you have to change ...
...shuts down fequantly and when i use youtube for long durations ur hard drive is badly fragmented download tune up utilities and then defrag it. if this doesnt work then u hv to do low level ...
...level.If not cleared after four or five attempts go into service mode and run tcr toner supply for black.(In Image Adjustment)This will clear down the error Or you may ...
level is ok, the paper is ok, the connections to USB are ok, but still doesnt print. I restarted the PC and the printer, but still nothing...I really dont know what else to try... uninstall the printe
Question about Samsung ML Office Equipment & Supplies
...doesnt work. cartrige is in but says it's empty.I have the 5600-6600 series.I have a #1 cartrige in.is it wrong? You should take it back and exchange it or read on below. Most modern cartridges have ...
...using a Paper Towel! Reinsert the Cartridges and Restart the Printer. Good Luck!!! Thanks Danilo. that worked. It prints now but the level of ink displayed when i click "Ink details" doesnt ...
Question about Samsung ML Office Equipment & Supplies
...work,take out the cartridge and clean the copper contacts that you see over there. In case it doesnt you can always contact a free online technical support with an online live techbuddies technician ...
...kodak printer My printer is not using the black ink when printing pictures. I have checked the ink levels and they are full but when i print the pictures it doesnt use black, so the pictues come out ...
Question about Office Equipment & Supplies
...clean. if it doesnt work after that, your ink cartidge level might be off, because i hear they never work half the time anyways. i would buy new ink if the cleaning the heads does not work. good
348 questions posted
Usually answered in minutes!
417 Questions
373 Questions
283 Questions
130 Questions
72 Questions
