Question about HP LaserJet Office Equipment & Supplies
...paper in tray 3 CAUSE: This error message indicates the paper present sensor flag in one of the trays does not detect paper in the tray. This could be caused by one of the following: A broken sensor ...
...paper tray, maybe even the paper input assembly preventing the paper platform from reaching the top. Check these and let me know what happens. The paper tray paper sensor may be stuck, and does not ...
Question about HP LaserJet Office Equipment & Supplies
...paper does not lift, remove tray 2 and look inside to your right and you will see the paper lifter. Make sure the spring has not fallen off the lifter. You may need to replace the lifter. Also try ...
...preventing lifting of the paper. Switching tray's is possible to ascertain if the problem lies with the tray or the printer. If the problem is with the printer the lift motor is suspected to
...paper tray. Did you also try and succeed in changing the tray 2 jam access door roller? 13.01.00 means that the pre feed sensor never sensed paper, so either the sensor is bad or the paper never fed ...
...paper tray is physically set for the correct size paper. Make sure that the tray is lifting when it is pushed into the printer. And you want to clean the the feed roller at the front of the tray. Use ...
Question about HP LaserJet Office Equipment & Supplies
paper tray 2 is stuck -- cant move in or out the paper lifting rack plastic tabs one of them is broken and the metal that is showing is catching on the guide so the lifting rack is not lowering into ...
...paper level on the front of the tray to see if it moves at all. Also listen for any chattering noise is it does lift. Sometimes if the metal panel in the tray that lifts is not moving smoothly this ...
tray lifts so that the paper touches the pickup roller. What is happening is that one side of the tray is not lifting correctly. Take out the toner and hold the machine upside down and give it a shake
paper tray. Now it says "no paper pick-up, even though I have 2 trays I can get neither to work. I have tried nv ram. The printer is only 3 months old and I can see nothing wrong with the rollers
205 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions
