Canon PIXMA iP6700D InkJet Photo Printer "printhead installed error message" Questions

...i get uo53 error message U053 is a printhead error, you might need a new printhead if all inks are installed properly and not empty. The printhead part number is stamped on the side of the

printhead installed - the printhead has never been changed Per Canon's website, and this just worked for my mp620: Turn the printer on. Open the cover. Remove the ink cartridges. Remove the printhead.

...installed. Install print head I just got this error message on my MP610 printer. I took the print head out and wiped it with a moist towel then dried it, but to no avail. It still has the error ...

...printhead but the error message remains. Is my only option to buy a new printhead? It seemed to be working until the paper jammed from the blockage. Thanks Error U052 for no obvious reason, CANON ...

...one that was caused by a bad printhead. If you can get it out, try powering up without the printhead installed, if it's bad, the error will change to no printhead and you can just pick up a new

...printhead I have a Canon MP830 with an error message The type of print head is incorrect Install the correct print head. I have verified and reverified that I have the correct print head. Any help ...

...Error Message U052 ... it says i have the incorrect print head. i did everything the canon website and utiliy suggested, but nothing works. any advice? Hi, sounds like you need new printhead, take a ...

installed - but it is the original print head; it has never had a replacement at all. New cartridges have still not solved the problem. The paper goes through the machine but comes out blank, although

...installed new ink cartridges This is a solution if the problem is with the printhead Remove the ink head and put it again Clean the print head using a little alcohol in places where you see excessive ...

...installed the software (Set up CD-ROM Disk) but it looks like I will not be able to print any document, until I resolve this error message. Should I take the print head out of the printer, and ...