Toshiba Gigabeat S30 MP3 Player "not power" Questions

...not AC/DC powered; only powered by your usb port), but if it has worked before, try swapping usb ports and see if it's recognised. Sometimes USB can have a power issue with certain hardware. tht was ...

...the battery for 5 minutes then put it back on. Check if the phone would respond properly. If not, check the power switch and see if there's something blocking the switch or it might need

...the power cord is bad, if the similar power cord did not charge your mp3 as well, then, it means the power cord is defective. you can now go ahead to get a replacement for the power cord. Take

...not. If you have several different things plugged into the hub, you most likely need a powered hub, one that plugs into the wall for power. USB devices need power supplied over the USB cable, and one ...

...not power up I have replaced the battery with a new battery. When I press the "p" button and cannot get my player to power up. I found the right button to power up the unit. "P" is not the power ...

...not power down or load Reset button, power button all I know to do Hi, Please try to press and hold the power button until you see the logo of your tablet. Make sure it is full charge and you are ...

...any Pc or laptop ... i can see power and data power and play power only i clickcd power and data ,for changing songs and video but iriver e 30 not appear in pc or laptop plz helpe me same problem ...

Not Power I Have a Inmotion model iM7, it turn on with battery; but not with the Power Cord.... Is the power cord the problem? Yes, the power cord is the problem. Charge via USB, or get the charger ...

...mp3 player and it does not stay powered on. You press the power button, it comes on and powers right back off. Batteries have been changed. Don't know how to fix this! I have the same battery ...

...not, try to power up then hold left down while powering on. Ipod touch- Maybe in DFU mode. To exit, Hold the power button and Home for 10 seconds the relese the home button but hold the power button ...