printhead stuck to the Wiper Blade? Check the process drive gears for damage and make sure they are aligned correctly. Has ink spilled into the tilt gears assembly or on its drive train? (left side of
Question about Xerox Phaser Office Equipment & Supplies
...Printhead is stuck or is not tilting properly over the cam. Initial Actions • Check that the Process Drive gear train is properly homed. • Check for obstructions or ink spills around the Printhead. • ...
...printhead could also be stuck to the wiper blade if the printer was turned off during a cleaning cycle. If you turn the x-axis motor does it move the printhead forward and backward? Check the process ...
Question about Xerox Phaser Office Equipment & Supplies
printhead is stuck or is not tilting properly. Check that the process drive gear train is properly homed. Check for obstructions or ink spills around the printhead. (was the printer tipped on its side
...printhead is stuck in the tilted position, or is not able to tilt forward to the print position, due to problems. Do the printhead lock arms rotate correctly. Has ink spilled ink around the printhead ...
Question about Xerox Phaser Office Equipment & Supplies
Printhead stuck to the Wiper Blade? Start the printer in diagnostics mode and run idiags test Exercise Heater - toggle Printhead heaters to soften the ink. Manual separate the wiper and Printhead. Set
printhead is stuck in the tiltposition,or is not able to tilt forward to the print position, due to another problem with a motor 7,010.43: The printhead is stuck in the tilted position, or is not able
printhead is stuck in the tilted position, or is not able to tilt forward to the print position, due to problems. 1 1. Reboot the printer. 2. Did this correct the problem? Complete. Go to Step 2. 2 1.
Question about Xerox Phaser Office Equipment & Supplies
...printhead is stuck in the tilted position, or is not able to tilt forward to the print position, due to problems. 1. Reboot the printer. 2. Did this correct the problem? Complete. Go to Step 2. 2 1. ...
Question about Xerox Phaser Office Equipment & Supplies
printhead is stuck in the tilted position, or is not able to tilt forward to the print position, due to problems. Troubleshooting Procedure Step Questions and Actions Yes No 1 1. Reboot the printer. 2
361 questions posted
Usually answered in minutes!
436 Questions
284 Questions
152 Questions
147 Questions
158 Questions