Question about Hitachi Televison & Video
...POWER SWITCH (ON/OFF SWITCH) once.2. If there is still no power, wait 30 seconds and press the POWER SWITCH again.3. If there is still no power, unplug the power cord from the wall. Wait 30 seconds ...
...power switch on the bottom of the display and a power button on top. The power switch is used to cut off power completely, whereas the power button turns the screen off but allows the remote to ...
switch mode power supply that supplies power to the main circuits. This would probably be caused by leaky Electrolytic Capacitors on the power supply PCB. In that case, if your up to using a soldering
...click when grabbing the TV to move it or swivel it. it is a toggle switch, a "master power" switch. you may have bumped it to the off position. flip the switch, your standby light will come back
Question about Televison & Video
...power light showing Red it then switched on using the on/off switch on the TV. I was then able to switch it off using the remote and subsequently switch iy on using the remote. It has now worked fine ...
Question about Hisense Televison & Video
...logic switch discharges the cap it fires up the SM Power Supply. This is how computers boot up. So look for bad cams on low voltage side. See where wires come in from switch to Power Supply. Good ...
...power switch the red standby lights for a couple of seconds the relay sort of click is heard then in stead of the tv powering on the standby light just slowly dies out? For around 6 months the switch ...
...power switch but still no power light, tried to switch it on from the remote control, still now power Please check the power cord. The plug and the socket and ensure the wires are connected properly. ...
117 questions posted
Usually answered in minutes!
255 Questions
269 Questions
227 Questions
221 Questions
201 Questions