TruTech PLV1615T 15 in. LCD Television "power board" Questions

Ad

Question about Zenith Televison & Video

3 Answers

...power board. Power does not leave power board from any terminals. The power supply board could very well be defective. I would also check the Zsus board and the Xsus boards. If either of these boards ...

Ad

...POWER BOARD. STILL WONT COME ON. CHECKED THE CIRCUITS. YES POWER IS TO THE BOARD. COULD IT BE THE SIGNAL BOARD? Hi Pam, For a TV to come on, the power board has to send 'stand by or SB5V or 3.5V ' to ...

Ad

...power board and inverter boards. The main board is defective the power on command originates from the main board and thats what gives the signal to start powering up the set. Replacing the main board ...

Question about Hitachi Televison & Video

1 Answer

...power board??? Main Logic Board ??? POWER FILTER BOARD??? DIGITAL PROCESSING HDMI??? Can you help me??? Without the correct meters and equipment it can get exspensive replacing boards however it ...

...power board which then makes other necessary voltage for the main board as well as other sections. If the power board does not receive 'Power On' command from main board, it will not produce the ...

Question about TruTech Televison & Video

1 Answer

power supply board,check for all those dead leakage capacitors parts that bulges up on it top or puff up on it top.Than it ur power supply board,replaced those dead leakages capicitors or replaced the

Question about Sanyo Televison & Video

1 Answer

...power supply board is dead.The other 5% are both boards some time are dead.The power supply board and the Tuner siginal board is dead.Replaced the power supply board it ur best bet to get power ...

Question about Panasonic Televison & Video

3 Answers

...board for the replacement.    10 blinks IS a bad pwr supply also this model has had problems with the D board  main board not on power,dont suspect the power

Question about TruTech Televison & Video

1 Answer

...power from SS board and SC2 power from SC board. 3. Turned power on, got 7 blink LED code. 4. Turned power off, plugged SS11 power back into SS board. 5. Turned power on, got 7 blink LED code. From ...

Not finding what you are looking for?
TruTech PLV1615T 15 in. LCD Television Logo

142 questions posted

Ask a Question

Usually answered in minutes!

Top TruTech Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

Eric Rotmil
Eric Rotmil

Level 3 Expert

587 Answers

Joaquim Martins

Level 3 Expert

1127 Answers

Are you a TruTech Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...