...toner, on the upper left side is a little white lever that sometimes gets stuck. When you find that lever, pull gently toward the inside and make sure that it moves freely and springs back when you ...
Question about Brother MFC Office Equipment & Supplies
...toner cartridge that you can cover with a piece of electrical tape to stop the error. For the drum error, you open the front door and press menu or options button and tell it it's a new drum and that ...
...left side of the drum unit and lift the toner out. *Handle the toner cartridge carefully. If toner scatters on your hands or clothes, immediately wash it off with cold water. d. Gently rock the toner ...
...left side of each page. I have cleaned everything that I can access to rule out smudged glass, etc. Perhaps it is just best to replace the drum or buy a new printer(much to Brother's ...
...left side of the drum unit and lift the toner out. *Handle the toner cartridge carefully. If toner scatters on your hands or clothes, immediately wash it off with cold water. d. Gently rock the toner ...
Question about Brother MFC Office Equipment & Supplies
...toner spots all along the left side of the paper. I ran the drum cleaning function 20 times, literally 20 times, and it didn't do anything. The manual isn't very helpful and I am hesitant to ...
...tell it it's a new drum, otherwise you clean the metal contacts on the sides of the drum and inside the printer, and run the blue tab back and forth about 20 times. If still drum error you may have a ...
toner cartridge, checked for paper jams or scraps. Can't tell exactly what piece, on the back cover, tells the machine that the cover is closed. I Had the Same Problem with a printer i got for free. I
Question about Brother MFC Office Equipment & Supplies
...tell you the same thing good luck and let me know if you have any further questions regarding this This error message is telling us that there's a some hardware error/failure already on your printer ...
tell me the part number or sell it to me. I think I found someone who will sell me the part if I can give them a part number. Anybody have any knowledge of this problem? If so, please help me out with
241 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions
