Brother MFC-7820N Printer "fax black streak print" Questions

...or copying a black streak developes, answer?? how do I get rid of streak only when faxing or copying, not when printing from Web. Open up the document feeder by pulling up and clean the scanner ...

...black streak when i scan or fax, I have a very faint area about two inches wide and just to the left of the middle. Printing is OK. I'd be interested in knowing how to "clean the scan area" or other ...

...MFC 8500 print issue I have a 1 inch wide black streak that comes when faxing or copying Try to clean your print head. I have HP all in one laser and doing that helped once when that happened to

Black Streaks Everything I do (fax, print, copy) results in a paper with a solid black streak down the middle. The copier has been saying replace drum soon for one year, so I have learned to ignore ...

...black and is 2 inches wide. Cleaning the wire does not help. This issues looking printer head problem. check the following Steps for cleaning printer head : Click on the Start button if you have ...

...black lines your primary corona wire is dirty and or the fax scanner may be dirty. 1)To clean the corona wire you take the drum unit and toner cartridge and place it on disposable paper to avoid ...

...black. 4. My floppy drive's lights turns on when the machine is turned on. 5. My printer is suddenly printing unknown characters. 6. I'm able to write DVDs in Windows XP , but when i upgraded to ...

...black. Its a DCP 1200. It also gets real warm if doing a lot of copies. What do you suggest? Replaced heat sensor a year ago. Hello sir; Either drum cleaning blade or drum cartridge needto replace. ...

Black streak on one side I'm getting a large black streak on one side of pagewhen print or faxing...was told it may be the "blue-green roller assembly"...quoted in excess of $300 for part...can you ...

...fax, it comes out black on their side. What going on? Received fax is unreadable or blurry Please go through the checklist below to see if the suggested action(s) can resolve the issue. * Make sure ...