Question about Brother MFC Office Equipment & Supplies
paper feed jams. feeds from lower tray, turns 180 deg. then jams. Single sheet feed is fine while keeping the paper .. ensure that it is properly stacked... fan the paper and ensure that it is not ...
Question about Brother MFC Office Equipment & Supplies
have caused the paper getting stuck. Another thing to do is to fan the stack of paper that you load. Do not load it straight away. Sometimes paper get stuck to each other and cause some loading issues
stuck in the 'down' position. I took tweezers to pull it back up and unstick it. To find the lever open the ADF look above paper feed roller just to the right of the first metal bar with the spring on
Question about Brother MFC Office Equipment & Supplies
STUCK TIGHT. How to remove jammed stack of paper? check at the rear part of your printer there a backdoor latch there.. open it..and you can get the jammed paper easily.. if there is a pieces of paper
...drum and copies are black and paper sheets won't come out and it stack up on the releasing roller. Could be the cleaning blade isn't working on the drum. Is the paper getting stuck on the fuser
stack of paper. Now I get a message to clear the paper jam. There is no paper jam, but the wheel that grabs paper seems stuck. Before you put papers in tray it must reshaple make separate each other ,
...to stack the papers, has not detected the paper being taken out of the tray. There is a sensor that has a black actuator sticking out in the middle of the output tray, It either fell off or is
...copier can print one or two clean pages but soon after it fails with one of the two problems I have described above. use stack bypass see whether u face any issue. if load paper error is occur so how ...
Question about Ricoh Office Equipment & Supplies
...stuck, the technician found the stack guide had shifted and was twished upward and at an angle but it took him and hour of sticking hangers etc in the openings to dslodge the green paper stack guide. ...
...printer.... sometimes the flag gets stuck in the up position..(causing the printer to think there's a big stack of paper needed to be taken off the machine...found this from another fixya
241 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions
