Samsung LN-S2738D 27 in. HDTV LCD Television "tv backlight shuts" Questions

...3. Backlight Please seek the expertise of an experienced TV repair technician - as they contain potentially lethal voltages that must be properly discharged before work can begin.

tv? Turns on for just a moment then shuts off. Replaced power board, main board & invertor. What's going on with this tv? Any ideas or suggestions? Please!! Hi Gina, A failed CFL in the backlights may

...TV Power Supply BN44-00341B. 5V and 12V are working but power supply does not power the backlight. It looks like the backlight voltage comes up momentarily and then shuts down. Is there a feedback ...

Backlight Inverter failure, or Main Power Supply failure. Rarely do the bulbs fail outright (although occasionally thru abuse a CCFL tube is cracked or shattered). (4) The typical failure mechanism on

TV DONT STAY ON ONLY CLICKS PAUSE TEN SECONDS THEN CLICKS AGAIN You may have bad power supply or short circuits in the power supply or backlight inverter board, the power supply (or bad caps) is ...

...means that the backlights and or the power supply for the back lights has died. Jerry G. Im in. No TV should only last 1-3 years !!!!!!! i am with you, I have the same problem! let me know what I

tv where the backlight flickers on for 2 seconds when powered on then goes out.I know it has multiple bulbs so would one bad one cause all of them not to work? Yes, one CCFL lamp out will cause the TV

...Backlight is working normally. Then it will suddenly turn off, no blinking red lights on front, no response to buttons or remote. I have to let it sit for a few days to allow it to do it again. I ...

...with no backlight When you turn the tv on the pictureflashes on momentarily then the light shuts off same when powering down it flashes before shutting down backlight inverter or backlight are ...

...Tv turns on, SONY lights up on the screen, screen goes black. You can get the menu to come up for a split second, then the screen goes black and stays black. Any ideas where to start troubleshooting ...