Xerox Phaser 6180N Laser Printer "inside paper jam" Questions

paper jam at start up after an employee moved the printer and spilled the ink inside. At first it started up making a clicking noise. I took the right side cover off and observed the clutch was out of

inside out and cannot find any scraps of paper or any location where there is any traces of paper being jammed, but still I get the error code telling me to open the top tray and remove the paper jam.

...a small paper inside your printer. after that try to turn it off your printer then afer 5 mins yiou can turn it on again. any changes happen and further question don't hesitate to contact me.

...again. One has to check the paper in the tray and see if it is free inside the top of the tray.I move the pickup. Have you turned it off for a few mins then on again. Tried different paper? Good ...

inside of machine, but it doesn't say anything about rollers or anything. TIA! Probably it's the jammed paper that might caused the error. I suggest have it serviced by the technician. Be aware of the

...paper is folding or getting stuck somewhere, look for what might be blocking it. I've seen this happen when one page jams and the page is torn and part is left in the printer. I've also seen ...

paper jams every time try to turn off the printer, unplug cables and remove the toner, then check if there loose papers inside the machine. You can use flashlight to determine if there are such loose ...

inside, to my horror there was a piece of paper wnd gobs of wax which had been unable to be cleaned out. After manualy removing all this, my 8560 warmed up more quickly. I must remind you there was no

...paper stuck inside the printer somewhere which is causing the jam. You basically have to find out where the previous jam was and check the rollers to see if they are clear. If it is cuz the cleaning ...

...paper is usually stuck inside the printer mechanism so even if there is no visible paper jam, you will still get the paper jam error. Try this: 1. Turn off your printer 2. Open all trays and remove ...