Xerox WorkCentre C2424DN All-In-One Laser Printer "printhead tilt error" Questions

...printhead (driven thru the process drive, the DM camshaft, and the head tilt gear train) tilts forward. If the printer does not see the expected encoder readings it assumes a tilt failure. for more ...

...printhead (driven thru the process drive, the DM camshaft, and the head tilt gear train) tilts forward. If the printer does not see the expected encoder readings it assumes a tilt failure. for more ...

...printhead to it?s center position (so it can tilt forward)? 1. Check the process gearbox for obstructions or damaged. 2. Ensure the gears are correctly aligned and homed. 3. Verify the process shaft ...

...printhead is stuck in the tilted position or is not able to tilt forward to the print position, due to problems: Has ink spilled ink around the printhead that prevents it from moving to its center ...

...Printhead tilt gear) â?  Head Tilt Gear (disengaged from Process Drive train; arrows on left frame point to each other) â?  Wiper Assembly (bottom of travel) â?  Process ...

...printhead tilt is not engaged, so it didn't tilt back properly or the printhead is stuck in the tilted position by the tilt lock arms. The process motor gear train getting out of sync can also cause ...

...ink spills or obstructions. and Printhead Tilt Gears. The Printhead should move when pushed left or right. Is the area around the Printhead clean and unobstructed? Remove ink spills or

Printhead tilt gear) ■ Head Tilt Gear (disengaged from Process Drive train; arrows on left frame point to each other) ■ Wiper Assembly (bottom of travel) ■ Process Drive

...Check for leaking wax around the silver block on the side of the printhead or around the waste tray, if wax gets into the tilt gear at the back of the waste tray slot, this is the error it