Hitachi 55HDX99 55 in. Plasma HDTV "buffer board repair" Questions

...buffer boards.If u have no mechanical skills and electronic skills.Best just call and take estamate of many prices of those tvs shop in ur cities area for the best prices and pick one ...

...buffer boards can be repaired, it is usually too expensive to do so. The Y sustain board can certainly be repaired and, if done properly, is both cheaper and reliable solution. The power board of the ...

...that are on the leftside and turn the tv on you should get half the picture. if that doesn't work then remove the other buffer board and try the samething. please leave feedback after you try

...buffer board. On these sets it is not uncommon for them to fail. At the same time of replacing the lower Y buffer board you should replace the upper Y buffer board since they work together. This is ...

board? I REPAIRED A PLASMA OF THE SAME SERIES TO NOTICE THAT THE HDMI WAS VERY LOOSE Your Y-Buffer Boards are going bad. There are 3 boards here. The Y-Buffer Upper controls the Displays top half, the

...buffer takes out the y main board too. You cannot just replace the y-main or buffer because it will just burn out the other within seconds. Also about 1/4 of the time it'll take out the top ...

...upper buffer board. Is it hard to fix? No, easy repair if you know for sure that is the only problem. It is very rare to have just an upper buffer board bad without the Y sustain board being bad

...buffer board that has gone or the ribbon cable going from the screen to the buffer board. If it is the buffer board it can be fixed by simply replacing the board with a new one, if its the ribbon ...

to the boards. On more than one occasion I have put a wedge under a buffer board to make a better connection. A good repair man will test the connections as well. Main video board could cause this too

buffer board(part number ND60200-0048) or do I have to replace the entire buffer board? the lower buffer board has a visibly burned IC chip on it and I wanted to know if i could replace the chip or do