Protron PLTV3250 32 in. LCD Television "tv dtv working" Questions

...TV FROZEN ON DTV CHANNEL 1 CHANNEL WORK WHEN YOU CHANGE TO TV CHANNELS 1 - 5 BUT DOES NOT WORK ON DTV CANT CHANGE JUST FROZEN ON CHANNEL 1 These are the steps to reset the DTV features and unfreeze ...

...the signal must first go through a digital converter or tuner before it goes into the DTV input. The DTV/ANT input is only cable ready. There is no digital tuner in the TV to activate the DTV

...DTV remote didn't recognize the TV video impute. It did yesterday, so I am confused. Ok,I am assuming you are using a converter box on this old tv,so first try to manually put the tv on ch 3 if you ...

...tv is in analogue mode, not dtv and turn it off. with the remote: press info then, menu, then mute then power. these buttons need to be pressed sequentially not all at the same time and in quick ...

...this might work on your dtv,try load a post card the size of a dvd and hold it in then try the source button to change to tv mode.It worked on my dtv-265-d now all i need is to get a remote

...DTV-265 26" flat screen digital TV. I recently subscribed to DirecTV and it works fine; however, since it was installed I have not been able to access the on-screen menu and cannot use the manual ...

DTV channel on your Tv. then with your Pioneer remote press the menu button and then set it away on a Auto tune. You must have it on a DTV channel first before try to tune as if you mistakenly have it

TV mode. When I cycle through the Input modes I get AV, S-video, YPbPr1 & 2, VGA, HDMI, DTV. All show "No Signal" when passed through except DTV which shows "Scan for Channels". Everytime I do this it

...DTV mode except a blue screen. TV mode appears to work normally as does AV3 which I used behind a DISH Network DVR. Any suggestions> Is there a master reset button? Follow up on No DTV tuner after ...

...TV (Mintek DTV-263 LCD TV/DVD combo)is not working after the DVD failed to reject the disc. The TV can not be turn on (power light is not on) after we tried to unplug and replug several times. Any ...