...tab. Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save. Now Automatic Duplexing should become available. My LaserJet 1320 will no longer do duplex printing with Windows ...
...automatic duplex printing); other printers allow you to manually reinsert pages to print the second side (manual duplex printing); and some printers do not support duplex printing at all. To find out ...
...automatic duplex printing: 1. Close the straight-through output door. 2. Open the printer Properties (or Printing Preferences in Windows 2000 and XP). See Configure the Windows printer driver for ...
...Automatic duplexing is enabled either at the control panel or through the driver. Check the printer setup on the contorl panel under paper handling. If it is not turned on at the printer level then ...
automatic duplexing...? Hi If you want to set Print on Both Sides (duplex) as the default setting for all print jobs (even single page jobs) use the following steps. Click Start , Printers or Printers
...Duplex printing (printing on both sides of paper) Yes: Automatic (standard) Please give me a big thumbs up for my answer, when you rate it. Thanks. An "n" after the printer (P3005n) means that it can ...
...is it wanting me to do when it says "install duplex unit"? A duplex unit allows you to automatically print double sided jobs. It sounds like a duplex unit is an option on your printer.
Question about Epson Stylus Office Equipment & Supplies
...automatic duplexing. I would make sure you have one of these 2 models. Depending on what driver was loaded the duplex option may show up, but if the printer does not have the duplex option and the ...
...automatic duplex printing, other printers allow you to manually reinsert pages to print the second side .and some printers do not support duplex printing at all. To find out whether your printer ...
Question about Epson Stylus Office Equipment & Supplies
...Duplex). If this were a DN model it would have built in automatic duplexing and you cound select "duplex printing" from your print setup screen and the printer would print both sides
317 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
454 Questions
438 Questions
