Konica Minolta Magicolor 2530 DL Laser Printer "paper feed top" Questions

Paper Feed errors on 2400W I have a 2400W that will go through spells of not feeding paper correctly. It will feed the top sheet half way in where is looks like it is designed to pause to be picked up

top than the bottom. if paper comes out straight, and lines in paper are not straight then there is problem wit laser unit, its not installed corrrectly, also you can check drum unit and transfer belt

...paper feeds ok but printing doesnt start at top of page thus causing to use two pages to print. Also, first page does not feed all the way through causing printer to stop and give error message with ...

...paper jam at feed tray. Repeat open and close of access and printer prints 3 or 4 pages and quits again. Error indication is a paper jam again at feed tray but there is no paper jam or partially fed ...

top feed unit cover. Examine and/or move around any movable parts. One of these parts is likely in a temporary position intended for clearing paper jams and needs to be returned to the normal position

Paper feed issue I have a Konica Minolta Magicolor 2400w printer. My problem is that the paper feed seems to me out of time causing a 1" unprinted area at the top of each page. I have cheched the feed

...paper feed rollers above the paper tray usually is the problem. Lacquer thinner is a bit to harsh on the rollers and it will melt plastic, I would use 409 on them instead, if that doesn't work check ...

paper) and place it in the feed way. Then press the print button applying a slight amount of pressure on the Card Stock so it will feed through the printer. The reason for this is in some cases I have

...you will see a diagram on how to pull the paper out in the case of a paper jam. Feed you file folder up from the bottom and you will ~ with a little work, more than likely be able to clear the

...feed clearing knob (turn anti-clockwise), and carefully remove what you can from the top. This may leave some of the paper tucked inside behind the back roller. Make sure your hands are clean. Keep ...