...FRONT of the place where your tv receives signal (usually where you can see a light), about 1mm away kinda thing! Hold it down until your tv powers off. Then it should be configured and working. It ...
Question about Philips Televison & Video
...front of the TV (in some cases this light turns red). We finally need to unplug the TV because it will not repond. We purchased a small signal board (SSB) and replaced it yesterday. We thought this ...
...turn on, blinking light at front. Please give solution and if parts are needed, where can I get them. Thanks. The clicking sound is the internal protection switch that kicked in because a fault had ...
...turn it back on with the remote or power button, its completly dead. i have checked that my power is working correctly in my house and other componets that i have are working in the same plug. any ...
Question about Hitachi Televison & Video
...signal, check if you get same problem with no receiver box or dvd connected. If that does not work, and you keep having a flashing led on front of the TV, and tv turning off by itself after a while, ...
Question about Sony Televison & Video
...signal muted. Check IC1509, Q1505 Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong ...
Question about Hitachi Televison & Video
...turn on. There is a new consistantly blinking in sets of 3 a small yellow light on the front. Any advice?! The problem is with the signal board. Basically, it is not allowing the power signal to go ...
...front of the tv (it is under the tv forward of the stand). Turn on the Main power if it is not on. Then try the power button on the control panel of the TV again. Does the standby light change color ...
...turn on and all it is doing is blinking 3 lights. the manual says that indicator is the tv warming up. but it has been doing it for over 3 hours The TV is on protect mode. Try first leaving the TV ...
Question about Hitachi Televison & Video
...front of the TV, and tv turning off by itself after a while, that indicates a fault condition. The flashing light indicates a diagnostic state called protection. When the TV goes on protection there ...
324 questions posted
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
357 Questions