Nikon COOLPIX S10 Digital Camera "blinking red hand" Questions

...red hand is blinking on the upper right side and the display is black. How can I fix this to be able to take pictures again? I got on to the Nikon website about this problem and I was advised that it ...

...red flashing clock I dont have the manual anymore. Could you tell me wot to do Thank you Nicko Problem with Nikon 4600, system error 1 0 after a memory card used in a Nokia set , any solution I had ...

...red clock blinking above thepixels (8m) on the rt hand side of te camr sceen. handsat 12 and 9 wiha dot at 3. icannot find th meaning of this symbol or get rid of it. what does it stand for andow can ...

...RED while it normally blinks GREEN..so how do i go about it..pleasen help I had an older nikon and it gave me that same problem, I was told that it was the internal lenses getting stuck. If that is ...

blinking red and white hand in the upper right portion of the screen Camera shake (blur) warning. You might have the camera set to an inappropriate 'scene' mode. If you are using 'landscape' or 'snow'

...red AF light starts blinking and it goes into a standy by mode it seems, kind of shuts off for a few seconds and then turns back on. It does this in the AUTO mode, however, if you take it off of the ...

...red blinking hand in right corner of screen stand for? 2.The WB (standard color) has a line through it. what does that mean and how do you turn it back on? 3.The flash wont go off, there is a line ...

...red in the lower right hand corner. I've tried all the settings and they all won't flash. If there is a problem with the flash itself or the mainboard connection to the flash it will not ...

red hand blinking This probably indicates that the selected shutter speed is too slow for hand-holding, and any images may suffer from camera shake. You can increase the shutter speed (maybe by ...

Nikon CoolPix S10 -- display shows a blinking red hand. I don't know what is wrong. Can you help? Thanks, Leslie Set the date and time by using the "Date" command in the Setup menu.