HP Photosmart C5180 All-In-One InkJet Printer "fail initialize hardware error code" Questions

...ERROR CODE 0XC18A0401 CAN U HELP? There is one fix for the 0x errors and it doesn't always work but this is the only option. Press and hold the "*" key. Press the "#" key and release both keys. ...

...error to go away, but now I'm back to the ink system failure again, this time with code 0xc18a0207. Any way around that one? Thanks, Gerry Please perform the following steps: A. - Press and hold the ...

Hardware failure status Cleared. Press Cancel to continue?. 9. Press and release the ?CANCEL? button as many times as necessary, so that, either the ?Welcome to Photosmart Express? screen appears, or,

...error code. We have a step by step guide to performing a purge of he ink tubes posted on our web site at: http://www.ccl-la.com/blog/index.php/category/printer-repair/hp-printer-repair/ This should ...

...error is still there Call HP & get the unit replaced Best of Luck :-) Solved similar issue by simply shutting the machine down, pulling the plug - waiting for thirty seconds and plugging and powering ...

...error. A hint - to take the right side off there's a tab on the bottom front you have to release. Then work around the seam between the right side and the top of the printer - it's a press fit - no ...

...hardware of the printer or the fax line failed. What your error code means is(look below) Definition There is too much noise on the line for a valid connection between two fax machines to complete. ...

hardware and ask if you have the manufacturers install cd or a location to check for install files. Direct the wizard to your new software, follow the rest of the setup instructions and your done this

...fail to complete the correct key sequence within two seconds, press the Stop key to try again). Other (non-FAX) models: Press the Menu/Set and Black Start keys. Next press the "up arrow" key four ...

...error. When the all-in-one is turned on and connected, follow the steps below to see if this is the problem: Right-click My Computer (click Start first in Windows XP) and then click Properties . Open ...